Daly's Exterior Painting Check List
- All areas to be painted are to be treated with Daly's Deck & House Cleaner.
- Each side of the structure should be treated, and then rinsed well before proceeding to the next side. Follow directions on the label.
- The homeowner is to be made aware if the structure is to be pressure-washed.
- After structure is thoroughly dry (approx. 2 days) scrape all areas showing loose paint and any questionable areas.
- All bare wood is to be primed, including joints to be caulked.
- Caulk around all windows and doors.
- Existing caulk, in poor shape, should be removed and replaced with fresh caulk.
- Caulk any questionable joints and cracks.
- Paint the structure with specified products; if coating is to be applied by an airless sprayer, back rolling or back brushing must follow immediately.
- All materials and colors are to be approved by the homeowner prior to application.
- Painting should not occur if there is any threat of precipitation that day.
- Do not paint in direct sunlight.
- All instructions printed on containers and technical data sheets must be followed.
When Hiring a Professional Painter:
- When hiring a painting contactor, an all-inclusive bid must be submitted by the contactor and signed by the homeowner prior to the commencement of any work.
- All work is to be completed on a timely basis, with inclement weather to be taken into consideration.
- The painting contractor will provide proof of insurance, bond, and Washington State contractors license prior to the start of any work.
- If anything unusual arises, the job should be stopped, a remedy agreed upon and approved by the owner in writing. Example: Dry rot located that needs to be repaired.
- When using latex paint, it is generally recommended that the weather sides of the home receive two coats of paint. It will increase the life of the paint job considerably.
- When using multiple containers of the same paint, "box" them together to ensure uniformity.
- When storing a partially used container of paint, float a piece of cardboard cut to the size of the can opening. This helps keep paint fresh for long periods of time.
- You can save work by only cleaning a brush at the end of the job. To store: take a brush that's still in use, wrap it in plastic wrap, and store it in the freezer. To use: run under tap water until thawed, then unwrap, and voila!